NS0-093 Practice Materials - NS0-093 Training Torrent - NS0-093 Test Prep

Rated:

, 0 Comments

Total visits: 0

Posted on: 06/20/25

The certification is necessary to get a job in your desired Network Appliance company. Success in the test gives you an edge over the others because you will have certified skills that will make a good impression on the interviewer. Most people preparing for the NS0-093 Exam are confused about preparation. How will they get real and updated NetApp Accredited Hardware Support Engineer (NS0-093) exam questions?

Our NS0-093 valid study guide is edited by out IT professional experts and focus on providing you with the most updated study material for all of you. You will pass your NS0-093 actual test in your first attempt. With the help of Network Appliance NS0-093 Current Exam Content, you will be more confident and positive to face your coming test. After you get your NS0-093 certification, you will be getting close to your dream.

>> NS0-093 Valid Guide Files <<

Download NS0-093 Fee - NS0-093 Reliable Exam Blueprint

To go with the changing neighborhood, we need to improve our efficiency of solving problems as well as the new contents of our NS0-093 exam questions accordingly, so all points are highly fresh about in compliance with the syllabus of the exam. Our NS0-093 Exam Materials can help you realize it. To those time-sensitive exam candidates, our high-efficient NS0-093 study questions comprised of important news will be best help.

Network Appliance NetApp Accredited Hardware Support Engineer Sample Questions (Q27-Q32):

NEW QUESTION # 27
You are replacing a boot device on a FAS8300 system that is running ONTAP 9.10P6 software. You attach a USB memory stick to the external USB port on the storage controller but cannot access the memory stick.
What step needs to be performed to access the boot device?

A. Add the boot device before the BIOS is loaded.
B. Set the port to "enabled" with setenv.
C. The external USB port is not activated on NetApp systems.
D. You need to use ONTAP 9.11 or later software.

Answer: B

Explanation:
When replacing a boot device on a FAS8300 system and using a USB memory stick for recovery or installation, the external USB port must be explicitly enabled. This is done through the setenv command in the boot environment.
* Reboot the system and interrupt the boot process to access the bootloader prompt.
* At the bootloader prompt, use the following command:
Steps to Enable the External USB Port:arduino
Copy code
setenv usbport_enabled true
* Save the configuration and proceed with the boot process.
* B. You need to use ONTAP 9.11 or later software:
* ONTAP 9.10P6 fully supports external USB recovery. There is no need to upgrade to ONTAP
9.11 for this functionality.
* C. Add the boot device before the BIOS is loaded:
* While the USB device must be inserted during the boot process, this alone will not enable access unless the port is enabled via setenv.
* D. The external USB port is not activated on NetApp systems:
* This is incorrect. The external USB port is supported but must be explicitly enabled in the bootloader environment.
Why Other Options Are Incorrect:
* NetApp Hardware Installation Guide for FAS8300 systems outlines the steps for enabling the USB port during recovery.
* "ONTAP Boot Troubleshooting Guide" specifies the use of the setenv command to activate USB ports.
References:

NEW QUESTION # 28
Which two ONTAP systems support both SSD and SAS disks? (Choose two.)

A. AFF C190
B. FAS2750
C. FAS8200
D. AFF A220

Answer: B,C

Explanation:
The following ONTAP systems support both SSD and SAS disks:
* Description:
* The FAS2750 is part of NetApp's hybrid storage array product line.
* It supports both SSDs for performance tiers and SAS disks for capacity tiers, making it suitable for mixed workloads.
1. FAS2750
* Description:
* The FAS8200 is an enterprise-level storage system that also supports hybrid configurations with both SSD and SAS drives.
* This system is designed to handle high performance and capacity needs.
2. FAS8200
* A. AFF C190:
* The AFF C190 is an all-flash system and only supports SSDs. It does not support SAS disks.
* C. AFF A220:
* Like the AFF C190, the AFF A220 is also an all-flash system that supports SSDs only.
Why Other Options Are Incorrect:
* NetApp "Hardware Universe" confirms drive support for FAS and AFF systems.
* NetApp product documentation details supported disk types for hybrid and all-flash systems.
References:

NEW QUESTION # 29
You have created a case with NetApp Support for an issue with a DS4246 shelf on an ONTAP 9.12.1 system.
They have requested that you provide shelf logs.
What action do you need to take to collect the shelf logs?

A. Invoke a diagnostic autosupport with the subsystem log_files.
B. Invoke a diagnostic AutoSupport with the subsystem storage.
C. Provide the output of the nodeshell command rdfile/etc/log/shelflog.
D. Invoke an autosupport of type all using Active IQ Unified Manager.

Answer: B

Explanation:
To collect shelf logs for a DS4246 shelf in an ONTAP 9.12.1 system, you must invoke a diagnostic AutoSupport specifically targeting the storage subsystem. This action ensures that detailed storage logs, including shelf logs, are included in the AutoSupport bundle.
* Use the following command:
Steps to Collect Shelf Logs:bash
Copy code
system node autosupport invoke -node <node_name> -type diagnostic -subsystem storage Replace <node_name> with the name of the node experiencing the issue.
* This command generates an AutoSupport message that includes logs related to storage subsystems, such as disk shelves and adapters.
* Provide the AutoSupport case number to NetApp Support for further analysis.
* A. Provide the output of the nodeshell command rdfile /etc/log/shelflog:
* While this command allows manual reading of shelf logs, it is not a recommended or comprehensive approach for collecting logs for NetApp Support cases.
* B. Invoke an AutoSupport of type all using Active IQ Unified Manager:
* This action generates a generic AutoSupport bundle, which may not include detailed shelf logs unless explicitly targeted.
* D. Invoke a diagnostic AutoSupport with the subsystem log_files:
* The log_files subsystem targets general system logs, not storage-specific logs like shelf logs.
Why Other Options Are Incorrect:
* "ONTAP 9 AutoSupport and Diagnostics Guide" outlines the use of the subsystem storage option for collecting shelf logs.
* The "Troubleshooting Storage Subsystems" documentation specifies diagnostic AutoSupport as the method for gathering shelf-related logs.
References:

NEW QUESTION # 30
How do you set environment variables to factory settings?

A. unsetenv all
B. setenv factory
C. set-defaults
D. wipeconfig

Answer: C

Explanation:
To reset environment variables to factory settings, the set-defaults command is used. This command clears all customizations and restores the environment variables to their default values.
* Command Syntax:At the LOADER prompt, type:
Key Details:arduino
Copy code
set-defaults
* Effect:This command resets all environment variables (e.g., boot arguments, diagnostic settings) to their original factory defaults.
* B. unsetenv all:
* This command clears all environment variables, but it does not restore them to factory defaults.
* C. setenv factory:
* This is not a valid command in NetApp systems.
* D. wipeconfig:
* This command is used to clear configuration and logs but does not reset environment variables.
Why Other Options Are Incorrect:
* NetApp "System Configuration Guide" confirms the use of set-defaults for restoring environment variables to factory settings.
References:

NEW QUESTION # 31
What are two valid commands that can be used to trigger an AutoSupport? (Choose two.)

A. ::> system node coredump upload -node <nodename>
B. ::> autosupport invoke -node <nodename> -type all
C. ::> autosupport history show-upload-details -node <nodename>
D. ::> autosupport invoke-core-upload -node <nodename>

Answer: B,D

Explanation:
To trigger an AutoSupport message in ONTAP, the following commands are valid:
* What it does:This command manually triggers a complete AutoSupport message of type "all." This includes logs and system information from all subsystems.
* How to use:
* Run the command: autosupport invoke -node <nodename> -type all
* Replace <nodename> with the name of the node for which you want to generate the AutoSupport message.
* Why it's relevant:This is the primary method for triggering a full AutoSupport message manually. It is commonly used during troubleshooting to provide comprehensive system data to NetApp Support.
1. ::> autosupport invoke -node <nodename> -type all
* What it does:This command is specifically used to upload core files (e.g., kernel or user space cores) from a node to NetApp Support for analysis.
* How to use:
* Run the command: autosupport invoke-core-upload -node <nodename>.
* Replace <nodename> with the name of the node for which you want to upload core files.
* Why it's relevant:If there is a system panic or other critical issue, this command ensures that core files are included in the AutoSupport message for detailed analysis.
2. ::> autosupport invoke-core-upload -node <nodename>
* A. ::> autosupport history show-upload-details -node <nodename>:
* This command displays the history of AutoSupport uploads but does not trigger a new AutoSupport.
* B. ::> system node coredump upload -node <nodename>:
* This command uploads coredumps directly to a support server but does not trigger an AutoSupport message.
Why Other Options Are Incorrect:
* "ONTAP 9 AutoSupport Configuration Guide" confirms autosupport invoke as a valid command to trigger AutoSupport messages.
* "ONTAP CLI Reference Manual" specifies autosupport invoke-core-upload for core file uploads.
References:

NEW QUESTION # 32
......

With the help of the Network Appliance NS0-093 brain dumps and preparation material provided by Exam4PDF, you will be able to get Network Appliance NetApp Certified certified at the first attempt. Our Network Appliance experts have curated an amazing NS0-093 exam guide for passing the NS0-093 Exam. You can get the desired outcome by preparing yourself from the NS0-093 exam dumps material provided by Exam4PDF. We frequently update our NS0-093 exam preparation material to reflect the latest changes in the NS0-093 exam syllabus.

Download NS0-093 Fee: https://www.exam4pdf.com/NS0-093-dumps-torrent.html

Network Appliance NS0-093 Valid Guide Files Security: We are committed to ensuring that your information is secure, Our Network Appliance NS0-093 practice materials compiled by the most professional experts can offer you with high quality and accuracy NetApp Accredited Hardware Support Engineer NS0-093 practice materials for your success, Network Appliance NS0-093 Valid Guide Files Our relationship does not end with your monetary transaction, Network Appliance NS0-093 Valid Guide Files It builds the users’ confidence and can be practiced and learned at any time.

It provides you the best Network Appliance NS0-093 dumps, Of equal importance, Perl implements a powerful taint" check system that prevents tainted data obtained from the network from being used in operations NS0-093 such as opening files for writing and executing system commands, which could be dangerous.

NS0-093 VCE dumps: NetApp Accredited Hardware Support Engineer & NS0-093 test prep

Security: We are committed to ensuring that your information is secure, Our Network Appliance NS0-093 practice materials compiled by the most professional experts can offer you with high quality and accuracy NetApp Accredited Hardware Support Engineer NS0-093 practice materials for your success.

Our relationship does not end with your monetary Popular NS0-093 Exams transaction, It builds the users’ confidence and can be practiced and learned at any time, It is regularly updated by our experts for keeping it always compatible to the needs and requirements of exam NS0-093 candidates.

Tags: NS0-093 Valid Guide Files, Download NS0-093 Fee, NS0-093 Reliable Exam Blueprint, NS0-093 Latest Test Question, Popular NS0-093 Exams

Comments

There are still no comments posted ...

Rate and post your comment

Username:
Password:
Forgotten password?

Most Popular

NS0-093 Practice Materials - NS0-093 Training Torrent - NS0-093 Test Prep

Download NS0-093 Fee - NS0-093 Reliable Exam Blueprint

Network Appliance NetApp Accredited Hardware Support Engineer Sample Questions (Q27-Q32):

NS0-093 VCE dumps: NetApp Accredited Hardware Support Engineer & NS0-093 test prep

Login